Welcome to Fluisys Hydraulic Pvt. Ltd. India Website!
      - Cartridge Valve and Manifols         Systems
      - Hydraulic Cylinders
     - Hydraulic Filters and Tank        Accessories From OMT Spa, Italy
     - Hydraulic Fittings from CAST SpA,        Italy
     - Hydraulic Power Pack
     - Hydraulic Winches
     - Hydroststic Transmission and Other        Hydraulic Products From Bondioli &        Pavesi , Italy
     - Transit Concrete Mixer Hydraulics
 
Fluisys Hydraulics Pvt. Ltd.
E - 137, Sector 63, Noida, U.P.
Cell : +91 9560529090
email : sales@hydraulicsforu.com www.hydraulicsforu.com
 
 

 
Relief valve

Flow max 150 lpm, pressure max 400 bar, available in various mountings to suit specific requirements as per the application for limiting the pressure and protecting the various circuit elements.

 
Sequence Valve

Flow max 120 lpm, pressure max 500 bar, available in various mountings to suit specific requirements as per the application for sequencing operation after a specific pressure setting is reached.

 
Pilot operated check valve

Flow max 60 lpm, pressure max 400 bar, available in various mountings to suit specific requirements as per the application for free flow in one direction and stop it in the other direction until the pilot pressure is reached from the other line.

 
Simple overcenter valve

Flow max 150 lpm, pressure max 400 bar, available in line mountings and flangeable mountings to suit specific requirements as per the application for load controlling and overrunning dangerously in one direction only.

 
Dual overcenter valve

Flow max 150 lpm, pressure max 500 bar, available in various mountings to suit specific requirements as per the application for load controlling in both direction.

 
Rotation control valve

Flow max 80 lpm, pressure max 500 bar, available in various mountings to suit specific requirements as per the application for controlling the slewing motion of overhead loads and soft brake control.

 
Safety valves

These ar hose burst valve, fitted in the cylinder ports directly so that it stops or minimizes the outflow of oil from the cylinder in case of pipe burst or hose failure. Flow max 150 lpm, pressure max 300 bar, available in various BSP thread sizes to suit specific requirements as per the application.

 
Shuttle valve

These are 3 way valve, and after detecting the higher pressure signal from the two inputs, output is decided.

 
Flow Restrictor valves

With and without free flow check valve, upto 240 lpm , max pressure 700 bar, non- compensated flow control available in line mounting.

 
Check valve

Available in line mounting, up to 150 lpm, 700 bar, in 3 cracking pressures free flow in one direction and closed in the other direction.

 
Flow divider and combiner

Available in an accuracy of ( -) +1.5 % for equal dividing and combining of flow coming from the same pump and going to similar cylinders/ actuator.

 
Diverter

A Large range of manual diverter is available for switching the inlet flow towards different outlets.

 
Multifunction diverter

These are special manual diverter used to switch the inlet flow towards different outlets for example in outrigger cylinders in cranes and arial platforms.

 
Revolving Connectors

This kind of valves are mounted in the hydraulic circuit where there is a need to allow a hose to spin free around its longitudinal axis , suitable for working at low rotation speeds.

 
Load limiting valve

This is a high precision on/ off valve, 70 pm and 400 bar.

 
Anti shock valves

These are 2way, 2 working position , normally open or normally closed, mechanically actuated end stroke valves.

 
Special valves

these are 2/2 and 3/2 switches, integrated valve blocks for garbage compactor, integrated valve blocks for bush grubbers and other mobile machines.

 
 
Copyright © 2009-13 Fluisys Hydraulic Pvt. Ltd.. All rights reserved.                                                                                                                                       Site Developed & Maintained by Webshell Technology